SC (B) 14 Type Cast Resin Dry-Type Transformer
Grade-1 energy-efficient cast resin dry-type transformer with about 10% lower no-load loss than SC(B)13, ideal for indoor distribution with strict energy and noise requirements.
SC(B)18 Cast Resin Dry-Type Transformer (NX1, Grade 1 Efficiency)
A GB 20052-2020 Grade 1 cast-resin dry-type transformer: no-load loss 40%+ below SC(B)10, noise 20% lower on average.
SC(B)15 Cast Resin Dry-Type Transformer
A cast-resin series for higher-efficiency requirements, positioned between SC(B)13 and SC(B)18.
SC(B)12 Cast Resin Dry-Type Transformer
No-load loss cut by more than 20% from SC(B)11, with noise 10–15 dB below the JB/T10088 standard.
SC(B)11 Cast Resin Dry-Type Transformer
A cast-resin series with loss further reduced from SC(B)10 — the balanced, mainstream choice.
SC(B)10 Cast Resin Dry-Type Transformer
The base cast-resin dry-type series: class F insulation, partial discharge below 10pC, flame-retardant, moisture-proof and maintenance-free.
SCBH15 Series Amorphous Alloy Transformers | 160–2500 kVA Energy Efficiency Preferred
SCBH15 Amorphous alloy distribution transformer series, 160–2500 kVA, ultra-low no-load loss, is an upgraded alternative for S13 in energy-saving retrofits and photovoltaic supporting projects.
SC(B)17 Amorphous Alloy Dry-Type Transformer
SCBH17-2000/10-NX2 Amorphous alloy dry-type transformers have no-load losses reduced by over 70% compared to silicon steel S13 of the same capacity, with energy efficiency acceptance and new energy station selection and third-party inspection reports.
SC(B)13 Cast Resin Dry-Type Transformer
SCB13-1000/10 epoxy resin cast-in-place dry-type transformer, 1000kVA, 10.5/0.4kV, fireproof, low-noise, low-partial discharge, compliant with IEC 60076-11, suitable for data centers, hospitals, and commercial buildings.